Biological wastewater treatment plants

The AQUABLOC treatment plant is working in the SBR-technology. One-chamber, one-tank system provides very good cleaning results, while a compact layout allows for plant installation to be performed in an easy and fast way. The system is optimally designed for single family houses. The treatment plant is operated with the oneFINGER system.

PRODUCT FEATURES:

• Lightweight, robust tank made of PEHD blow-out method
• Easy and convenient transport
• No mechanical parts in the treatment plant
• High physical endurance
• SBR Activated Sludge technology with integrated sludge stabilization
• High cleaning efficiency
• Low operating costs

BOD5 98.70% | COD 94.80% | SUSPENSION 98.80% | NH4N 92.90%

The SBHR sewage Treatment plant is a residential wastewater treatment plant designed for the treatment of domestic and industrial wastewater. The sewage treatment tanks are made of high density polyethylene wit blow-out metod. In biological wastewater treatment technologies one of the most important parameters in the effectiveness of the treatment process is the diversity of biocene responsible for the effectiveness of purification. Widely used aerobic purification technologies are mainly imported into two systems: biological bed and activated sludge. Each of the methods, due to the difference in the composition of biocenosis, has both advantages and disadvantages, therefore the combination of both methods seems logical. This is to ensure the highest efficiency of treatment, as well as immunization against quantitative and qualitative changes in treated wastewater. The high cleaning efficiency of the SBHR system has been confirmed in a test report.

BOD5 93% | Cod: 93% | Oral suspension: 94% | N: 94% | P:91

PRODUCT FEATURES:
• The SMART Block SBR treatment plant is made of high density polyethylene PE-HD
• Technical container with aeration blower, advanced controller included
• The quality of treated wastewater complies with the EU requirements so that it can be discharged to a water receiver or ground
• No biopreparators are needed
• Easy transport
• Simple assembly and operation
• The entire installation of the SMART Block SBR sewage treatment plant with a dedicated 2 absorbent well takes only 10 m2
• Sludge removal only once a year
• Lack of mechanical parts in the treatment plant
• Modular construction of the sewage treatment plant
• The entire purification process takes place in one tank

BZT5 94.10% CHZT 85.80% GENERAL SUSPENSION 83.10%

PRODUCT FEATURES:
• The SMART ONE SBR treatment plant is made of high density polyethylene PEHD
• Technical container with aeration blower, advanced controller included
• The quality of treated wastewater complies with the EU requirements, thanks to which it can be discharged to a water receiver or ground
• No biopreparations are needed
• Easy transport
• Simple assembly and operation
• The entire installation of the SMART ONE SBR sewage treatment plant with a dedicated absorption well takes only 10 m2
• Sludge removal only once a year
• Lack of mechanical parts in the treatment plant
• Modular construction of the sewage treatment plant
• The entire purification process takes place in one tank
• 10 years tank warranty

BZT5 98.70% CHOD 94.80% GENERAL SUSPENSION 98.80% | NH4N 92.90%

PRODUCT FEATURES:
• The BIOTIC Roto sewage treatment plant is made of high density polyethylene PE-HD
• Cover with a diameter of 1040 mm provides excellent access to all chambers of the treatment plant
• Technical container included with aeration blower, electrical switchboard, alarm signaling notifying of incorrect blower operation
• Easy to use and replace the time programmer responsible for the cyclical operation of the treatment plant
• Low operating costs
• The quality of treated wastewater complies with EU requirements so that it can be discharged to a water receiver or ground
• No biopreparation is needed
• Easy transport
• Simple assembly and operation
• Sludge removal only once a year
• CE certificate

BZT5 98.20% CHZT 94.00% Overall suspension 94.40%